|
Home:
Products > Benchtop Laser Diode Controllers > Pilot Analog
Pilot
Analog, Low Noise Laser Diode Controller
Description:
The Pilot Analog is a benchtop, highly precise, low noise,
purely analog laser diode controller. The laser current or the optical
output power and the temperature of the connected laser diode can be precisely
regulated 
Security Features:
The Pilot Analog incorporates proven laser protection features,
including Slow Start, Interlock, Compliance Voltage Protection, Passive Polarity
Protection by separated current lines.
Low Noise Power
Supply:
The power supply of the laser controller is
designed with a special shielded toroidal power transformer. No switch mode
power stages in the controller are one of the key points to provide a minimum
noise level of the laser current. The linear Pilot Analog power
stage is a development basing on our previous design which is proven since more
then 10 years in Sacher Lasertechnik products.
|
Pilot P500 |
Pilot
P3000 |
| |
|
|
| Laser
Controller |
|
|
| Current Range |
0 ... +/- 500mA
|
0 ... +/-
3000mA |
| Compliance
Voltage |
7V |
7V |
| Setting Accuracy |
+/- 0.1% |
+/- 0.1% |
| Resolution |
0.1mA |
1mA |
| Noise Figure (10Hz ...
10MHz) |
< 5µA RMS |
< 20µA
RMS |
| |
|
|
| Temperature
Controller |
|
|
| TEC current range |
0 ... +/- 2A |
0 ... +/- 4A |
| Output Voltage |
-8V ... +8V |
-8V ... +8V |
| Maximum Power |
16W |
32W |
| Noise &
Ripple |
< 1mA |
< 1mA |
| Temperature
Sensor |
AD590 |
AD590 |
| |
|
|
| General
Data |
|
|
| Line Voltage |
100V / 115V / 230V
+/-
10% |
100V / 115V / 230V
+/-
10% |
| Line Frequency |
50Hz / 60Hz |
50Hz / 60Hz |
| Operation
Temperature |
0 ... 50°C |
0 ... 50°C |
| Storage
Conditions |
-25°C ... +70°C |
-25°C ...
+70°C |
| Warm-up Time |
10min |
10min |
| Weight |
< 5kg |
< 5kg |
| Dimensions (W x H x
D) |
22 x 9 x 32 cm |
22 x 9 x 32
cm |
All specifications are subject to change
without further notice |
