Scientific LasersIndustrial LasersLab EquipmentElectronic SystemsLaser Diodes
close [x]

Karriere bei Sacher

Karriere bei Sacher
Verwirklichen Sie sich selbst in einem anspruchsvollen und teamorientierten Umfeld.

Benchtop Laser Diode Controller

Laser Current | TEC | Remote Control


The PilotPC is a laser diode controller together with a laser diode temperature controller combined in one bench-top instrument. Special features are low noise laser current as well as highly stable temperature control. All function can be remote controlled via USB, GPIB / IEEE 488.2, and RS232 interface.
Benchtop Laser Diode Controller

Laser Diode Current Controller:

  • Operates Anode- and Cathode Grounded Laser Diodes and Photodiodes
  • Operates Light Emitting Diodes (LED)
  • External Modulation Input
  • Analog Monitor Output for Laser Current and Laser Power
  • Laser Diode Control Modes
    • Constant Current Mode
    • Constant Power Mode
  • Laser Diode Protection Features
    • Adjustable Laser Current Limit
    • Adjustable Laser Power Limit
    • Adjustable Compliance Voltage
    • Temperature Window Function
  • Extremely Low Laser Current Noise Figure
  • High Laser Current Long Term Stability

Laser Diode Temperature Controller:

  • Excellent Temperature Stability
  • Digital PID Control with Separate P, I, D Settings
  • Temperature Sensors
    • NTC Sensors
    • AD590 Sensors
  • TEC Protection Features
    • Adjustable TEC Current Limit
    • Time-Out Limit
    • Temperature Window Function

Demanding diode lasers as Distributed Feedback (DFB) Diode Lasers or External Cavity Diode Lasers (ECDLs) require a highly precise, low noise, long term stable diode laser controller. Spectral linewidth as well as long term stability of these laser systems are directly determined by the laser controller. The PilotPC represents more than 15 years of experience in precision laser system development for laboratory and industrial enviroments.

  PilotPC 500 PilotPC 4000
Laser Controller    
Current Range  0 ... +/- 500mA 0 ... +/- 4000mA
Compliance Voltage 7V 7V
Setting Accuracy +/- 0.1% +/- 0.1%
Resolution 0.1mA 1mA
Noise Figure (10Hz ... 10MHz) (see Note No. 20) (see Note No. 20)
Temperature Controller    
Temperature control range -5°C ... +30°C -5°C ... +30°C
Setpoint Accuracy 1mK 1mK
TEC current range 0 ... +/- 2A 0 ... +/- 4A
Output Voltage -8V ... +8V -8V ... +8V
Maximum Power 16W 32W
Temperature Sensor AD590 / 10k NTC AD590 / 10k NTC
General Data    
Line Voltage 100V / 115V / 230V
+/- 10%
100V / 115V / 230V
+/- 10%
Line Frequency 50Hz / 60Hz 50Hz / 60Hz
Operation Temperature 0 ... 40°C 0 ... 40°C
Storage Conditions -25°C ... +70°C -25°C ... +70°C
Dimensions (W x H x D) 270 x 110 x 320 mm 270 x 110 x 320 mm


Technical Documents